Paxton-superchargers Mustang Renegade Class Manuel d'utilisateur télécharger pdf (Page 11)

P/N: 4809622a

07SEP06 v2.0 MusRenegade(4809622a v2.0)

4-1

Section 4

AIR INLET/DISCHARGE TUBE INSTALLATION

4.1 INSTALL THE DISCHARGE TUBE

RENEGADE SLEEVE ATTACHED TO

NOVI 2000 (CUTAWAY)

A. Install the discharge tube to the NOVI 2000

supercharger. (See Appendix “G”.)

B. Attach one 3.00" sleeve to the discharge of the

supercharger with two T-bolt clamps that are

provided. Leave the clamps loose.

C. Install (item #2 4PFA012-071) to the 3.00"

sleeve just installed to the discharge of the S/C.

D. Attach a 3.00" sleeve and clamps to the dis-

charge duct (item #1 4PFA012-051) and attach

duct to item #2 previously installed to the dis-

charge of the S/C.

E. Attach two 3.00" sleeves and clamps to the dis-

charge duct (item #3, 4PFA012-061), and attach

to the previous duct that was installed.

F. Adjust ducts for alignment and tighten clamp

G. To be legal for the Renegade Race Class, install

the Renegade Venturi Sleeve at the inlet of the

supercharger. (See Fig. 4-a.)

Fig. 4-a

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Paxton-superchargers Mustang Renegade Class Manuel d'utilisateur Page 11