Paxton-superchargers Plymouth Prowler Manuel d'utilisateur télécharger pdf (Page 20)

7-2

P/N: 4809629

22OCT02 v2.0 PlymProwler(4809629v2.0)

D. Install the oil drain fitting on the supercharg-

er. Install a 2” long turbo hose (from the dis-

charge tube assembly p/n 1016049) onto the

discharge of the supercharger using a #48

hose clamp (place the screw of the clamp in

towards the supercharger). (See Fig. 6-4.)

Fig. 6-4

TURBO SLEEVE

OIL DRAIN

E. Install the supplied Lower Radiator hose

(P/N: 1016055) to the engine.

F. Relocate the wiring harness that runs under-

neath the supercharger by drilling a new

hole and attaching the harness with a ZipTie.

(See Fig. 6-5.)

Fig. 6-5

NEW HOLE

DRILLED

Attach the oil feed and oil drain hoses to the

supercharger, making sure they won’t come

in contact with the exhaust manifold, hot

engine surfaces, or hit anything when the

engine rocks. The oil drain fitting can be

turned to make adjustments in the line place-

ment.

H. Affix the remaining smooth idler pulley to

the last open hole in the mounting bracket.

Install the accessory/supercharger drive belt.

(See diagram 7000110.)

G. Mount the supercharger to the bracket, but

leave the four 3/8” bolts slightly loose.

*****NOTE*****

The discharge tube points straight down. Start

the three countersink allen bolts and tighten

using a 7/32 allen wrench. Go back and tighten

the 3/8” bolts, using a 9/16 socket.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 57 58

Pas de commentaire

Paxton-superchargers Plymouth Prowler Manuel d'utilisateur Page 20