Paxton-superchargers Plymouth Prowler Manuel d'utilisateur télécharger pdf (Page 21)

8-1

P/N: 4809629

22OCT02 v2.0 PlymProwler(4809629v2.0)

Section 8

FAN MODIFICATION

A. Install spacers between the fan and the

shroud. Detach the fan from the support

brace by removing the two mounting screws

and popping the spring clips (see Fig 8-1).

8.1 FAN MODIFICATION

Fig. 8-1

Remove the spring clip that retains the fan

(see Fig. 8-2) and remove the three screws

using an internal Y-27 torx socket (This is a

hard to find size. If you do not have one, a

pair of pliers will do the job.)

Place the three spacers between the motor

and the fan shroud (see Fig. 8-3). This will

space the back of the fan motor away from

the engine slightly. Reassemble the fan.

Fig. 8-2

Fig. 8-3

REMOVE SPRING CLIPS

3 SPACERS

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Pas de commentaire

Paxton-superchargers Plymouth Prowler Manuel d'utilisateur Page 21