Paxton-superchargers Plymouth Prowler Manuel d'utilisateur télécharger pdf (Page 15)

5-1

P/N: 4809629

22OCT02 v2.0 PlymProwler(4809629v2.0)

Route the 5/8”power steering hose to

the new reservoir through the same

notch as the battery cables go through.

It may be helpful to flatten a section of

the fins on the bottom of the A/C con-

denser to ease the routing. Route the

3/8” hose around the end of the A/C

condenser on the driver’s side.

B. The line from the Power Steering Pump

to the Rack and Pinion is modified, per

7000100. Reinstall the line and check

for the correct orientation. If it is not

correct, loosen the fitting and rotate.

Reinstall the plastic clip to hold the line

in place, as shown in Fig 5-2.

Fig. 5-3

Fig. 5-1

Fig. 5-2

New power steering reservoir, mounted on

frame rail. Showing hoses going through the frame.

C. Cut the existing metal tube and flare

the ends with a pair of pliers.

(See Fig. 5-3.)

5.1 THE POWER STEERING SYSTEM-

MODIFICATION

A. Mount the supplied power steering

reservoir to the frame rail in front of

the hood release and next to the driver’s

side headlight. Drill two 11/64” holes

and secure the reservoir using the sup-

plied hardware. (See Fig. 5-1.)

Section 5

MODIFICATION OF THE POWER STEERING SYSTEM

Install the existing rubber hose and

hose clamps. The metal line is reversed,

so that the same end remains attached

to the curved rubber tube. Attach the

metal line to the new reservoir with the

provided 5/8” rubber hose.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 57 58

Pas de commentaire

Paxton-superchargers Plymouth Prowler Manuel d'utilisateur Page 15